Metal radiant ceilings

Overview

Series GK metal radiant ceiling

System made in steel plate composed of active and inactive panels, supported by characteristic visible parallel or crossed load-bearing structures. Two different activations (type C, with thermal diffusors in anodised aluminium and hydraulic circuit with copper coil; type A, with thermal diffusors in anodised aluminium and hydraulic circuit with PB pipes and anti-oxygen barrier) make it possible to satisfy various thermal return requirements.

Show image Show image Show image

Series GK PSV metal radiant ceiling

System made of steel plate composed of panels, active and inactive, supported by classic T base 24 mm load-bearing structure. Possibility of creating ceilings with two different modularities: square 600x600 mm and rectangular 600x1200 mm. Two different activations (type C, with thermal diffusors in anodised aluminium and hydraulic circuit with copper coil; type A, with thermal diffusors in anodised aluminium and hydraulic circuit with PB pipes and anti-oxygen barrier) make it possible to satisfy various thermal return requirements.

Show image Show image Show image

Connection components and other elements

The following complete our offer for the realization of the radiant system: PB pipes with anti-oxygen barrier, distribution manifolds, adaptors, connection kits formed of butyl flexible pipes with stainless steel braid covering and removable push-fitting connections, rigid spacing suspension structures, thermo-acoustic insulation panels in polyester fibre with combined TNT membrane.

Highlights

Active panel: type C activation, with copper coil 12x1 mm.

Active panel: type A activation, with plastic PB pipe 16x1.5mm with anti-oxygen barrier.

Surface finish: panels available in smooth or micro-perforated version.

Possibility of inspection. The radiant ceiling can be opened at any time to have free access to the system located in the plenum and to perform maintenance operations. The panels taken be placed in vertical position also with system in operation; depending on the version, they can rotate around the load-bearing structure to which they are hooked or remain suspended from the structure with special metal cables, after having being removed from their slot. Under no circumstance is traction exercised on the connection pipes.

Integration with other plant engineering. All our systems can be easily integrated with other systems such as lighting devices, air diffusors or loudspeakers. Inactive panels are available equipped with specific pre-punching to avoid holes or breaks at the worksite. The selection of standard modularity makes it possible to use market standard devices and terminals in place of inactive panels. Small devices can be integrated into the load-bearing elements.

For orders of a certain importance, the ceiling can be personalised in terms of modularity, colour (RAL range), opening method and type of material.

Maximum environmental comfort (uniform distribution of the horizontal and vertical temperatures, absence of drafts and dust circulation, silent operation)
Efficient energy consumption for the entire life of the building (lower comfort temperature compared to that of traditional radiator systems, for an energy savings of 7÷8% for every degree less of the air)
Ideal climate for all seasons, given that a single system is suitable for heating in the winter and cooling in the summer
Thanks to the operation with water at less extreme temperatures, it is ideal in combination with high efficiency generators (such as condensing boilers and heat pumps) and provides efficient use of renewable sources (such as geothermal and solar thermal).
Maximum architectural freedom, thanks to the absence of terminals in the room
No maintenance
For new constructions and restorations in both the residential and tertiary/industrial sectors
Single producer to guarantee a wide range of complete, reliable and economical solutions

Maximum design and architectural freedom
High performing systems (high yield and low thermal inertia), silent and with financial convenience over the span of the entire useful life
Compliance with the most recent laws which require the realization of energy efficient buildings, in which the building shell and systems are designed one as a function of the other
Large catalogue with standardised solutions
Possibility of personalising on special orders
Easy integration of room terminals of other engineering
Ideal in combination with high efficiency generators, such as condensing boilers and heat pumps
Possibility of effective use of renewable sources, such as geothermal and solar thermal
Technical consulting at the company to support the professional in the project
Supporting calculation programs
Specific training at the company

Complete catalogue for every installation need
Continuous updating of the range
Single contact person for the entire system, to guarantee cost savings and efficient service

Single contact person for the entire system
Complete catalogue for every installation need
Continuous updating of the range
Panels pre-assembled at the factory to facilitate the installation phase at the worksite
System of rapid installation
Qualified technical consulting at the company
Specific training at the company
System with virtually no maintenance, for high operating continuity.