Metal radiant ceilings

In the buildings of the tertiary sector (offices, hospitals, airports, commercial environments, school buildings) a ceiling is often planned, above which systems and service networks canbe installed. Making this ceiling the principal element of the air conditioning system makes it possible to optimize its cost and, especially, to benefit from all the advantages offered by radiant technology: considerable comfort and environmental healthiness, consistent energy savings, maximum architectural freedom and enhancement of the surfaces and volumes of the building.

Our metal ceilings, offered in various and customisable aesthetic types, make it possible to create comfortable and extremely efficient air conditioning systems, thanks to their high yield and low thermal inertia.

Overview

Series GK metal radiant ceiling

System made in steel plate composed of active and inactive panels, supported by characteristic visible parallel or crossed load-bearing structures. Two different activations (type C, with thermal diffusors in anodised aluminium and hydraulic circuit with copper coil; type A, with thermal diffusors in anodised aluminium and hydraulic circuit with PB pipes and anti-oxygen barrier) make it possible to satisfy various thermal return requirements.    

Series GK PSV metal radiant ceiling

System made of steel plate composed of panels, active and inactive, supported by classic T base 24 mm load-bearing structure. Possibility of creating ceilings with two different modularities: square 600x600 mm and rectangular 600x1200 mm. Two different activations (type C, with thermal diffusors in anodised aluminium and hydraulic circuit with copper coil; type A, with thermal diffusors in anodised aluminium and hydraulic circuit with PB pipes and anti-oxygen barrier) make it possible to satisfy various thermal return requirements. 

Connection components and other elements

The following complete our offer for the realization of the radiant system: PB pipes with anti-oxygen barrier, distribution manifolds, adaptors, connection kits formed of butyl flexible pipes with stainless steel braid covering and removable push-fitting connections, rigid spacing suspension structures, thermo-acoustic insulation panels in polyester fibre with combined TNT membrane.

Highlights

Active panel: type C activation, with copper coil 12x1 mm.

Active panel: type A activation, with plastic PB pipe 16x1.5mm with anti-oxygen barrier.

Surface finish: panels available in smooth or micro-perforated version.

Possibility of inspection. The radiant ceiling can be opened at any time to have free access to the system located in the plenum and to perform maintenance operations. The panels taken be placed in vertical position also with system in operation; depending on the version, they can rotate around the load-bearing structure to which they are hooked or remain suspended from the structure with special metal cables, after having being removed from their slot. Under no circumstance is traction exercised on the connection pipes.

Integration with other plant engineering. All our systems can be easily integrated with other systems such as lighting devices, air diffusors or loudspeakers. Inactive panels are available equipped with specific pre-punching to avoid holes or breaks at the worksite. The selection of standard modularity makes it possible to use market standard devices and terminals in place of inactive panels. Small devices can be integrated into the load-bearing elements.

For orders of a certain importance, the ceiling can be personalised in terms of modularity, colour (RAL range), opening method and type of material

Advantages

  • Maximum environmental comfort (uniform distribution of the horizontal and vertical temperatures, absence of drafts and dust circulation, silent operation)
  • Efficient energy consumption for the entire life of the building (lower comfort temperature compared to that of traditional radiator systems, for an energy savings of 7÷8% for every degree less of the air)
    Ideal climate for all seasons, given that a single system is suitable for heating in the winter and cooling in the summer
  • Thanks to the operation with water at less extreme temperatures, it is ideal in combination with high efficiency generators (such as condensing boilers and heat pumps) and provides efficient use of renewable sources (such as geothermal and solar thermal).
  • Maximum architectural freedom, thanks to the absence of terminals in the room
  • No maintenance
  • For new constructions and restorations in both the residential and tertiary/industrial sectors
  • Single producer to guarantee a wide range of complete, reliable and economical solutions
  • Maximum design and architectural freedom
  • High performing systems (high yield and low thermal inertia), silent and with financial convenience over the span of the entire useful life
  • Compliance with the most recent laws which require the realization of energy efficient buildings, in which the building shell and systems are designed one as a function of the other
  • Large catalogue with standardised solutions
  • Possibility of personalising on special orders
  • Easy integration of room terminals of other engineering
  • Ideal in combination with high efficiency generators, such as condensing boilers and heat pumps
  • Possibility of effective use of renewable sources, such as geothermal and solar thermal
  • Technical consulting at the company to support the professional in the project
  • Supporting calculation programs
  • Specific training at the company
  • Complete catalogue for every installation need
  • Continuous updating of the range
  • Single contact person for the entire system, to guarantee cost savings and efficient service
  • Single contact person for the entire system
  • Complete catalogue for every installation need
  • Continuous updating of the range
  • Panels pre-assembled at the factory to facilitate the installation phase at the worksite
  • System of rapid installation
  • Qualified technical consulting at the company
  • Specific training at the company
  • System with virtually no maintenance, for high operating continuity.

Documentation

Catalogues and leaflets

Coming soon. We are currently working on documentation related to this topic.

Technical focus

Certifications

Visit our Download Area to view and download our certifications and homologations.

Projects around the world Radiant System

Vedi tutti